LWF-MC-V Cable Scale With Spiralator™
Low rate feeder up to
500 lbs/hr @ 50 pcf material
(Configured for overhead support)
The LWF-MC-V Loss of Weight Feeder with Spiralator™ is designed to assure uniform, non-pulsating accurate feeding of a wide range of materials, from free flowing to friable to cohesive.
- Ideal for feeding materials without feed rate pulsation.
- Simple, low cost design makes it an excellent choice for feeding free flowing materials such as pellets or granules.
- 15 year load cell guarantee.
- Widely recognized as the most suitable choice for feeding delicate materials such as fiberglass and other reinforcing materials.
- "ATWL" AutomaticTest Weight Lifter simplifies the application of test weights for calibration checking. The FMSS system can be configured to accept automated means for applying and storing calibration weights initiated from a remote location. This is a preferred system where quality control procedures dictate "Calibration Status" printed on production reports.
- Precise second-to-second control with exclusive "EFT" Tracking.
Specialized material conditioning system
The LWF-MC-V when fitted with our Spiralator™ vertical lift agitator creates a patented feeder system that assures conditioned and uniform flow of caking and cohesive powders as well as interlocking particles and delicate flakes.
Two feed tray designs available
- Standard mirror finished steel tray is used for non-cohesive pellets, granules, fibers and flakes.
- Optional, patented elastomer membrane insert fitted to our vibrating tray.
|