S52i Weigh Belt and Conveyor Belt Scale Integrator

The S52i Integrator is a full featured instrument in a single, compact package. It performs the same functions as an instrument costing many times more without sacrificing the accuracy associated with Thayer products. Simplicity of use has always been a very important factor in designing an instrument and the S52i has inherited all the time and labor saving methods Thayer has developed over the years.

Menus and procedures that are written in plain English, not some code that must be interpreted, set the S52i apart from the competitors.

The S52i Instrument can be used on most belt conveyor weighing systems to provide continuous information about the flow of material to its process by monitoring the load and speed. The weigh system must use a strain gauge to sense weight; however a variety of sensors can be used to sense the speed.

Weight information is processed as weight per length and speed is processed as unit length per time.

Integrated together, a great deal of information is available about the system, such as: flow rate; accumulated weight (totalizers); belt loading; belt speed; etc.

The THAYER S52i Weigh Belt and Belt Scale Integrator provides maximum versatility in system integration and ease of customer use. Proprietary software, stored on a removable FLASH memory card, monitors continuous weighing equipment. Simple English instructions guide the user through menu programming, I/O selection and calibration routines. Powerful on-line diagnostic displays and historical data make solving problems a snap.

Specifications:
Keyboard: 21 keys with audible and tactile feedback, 96 ASCII Keynotes.
Display: 20 character X 4 supertwist liquid crystal display.
All parameters are held in non-volatile EEPROM

Input Power Requirements:
Input Voltage: 100-240 VAC
Input Frequency: 50-60 Hz
Input Current: 40W 0.4 A max at 230 VAC; 60W: 0.6 A max at 230 VAC
Inrush Current: 40 A max at 230 VAC
Earth Leakage Current: <100 µA at 115 VAC, <200 µA at 230 VAC
Input Protection: 3.15 A internal fuse in line & neutral
Communications available:
DeviceNet,
PROFIBUS,
Ethernet/IP & MODBUS/TCP,
Q2 – Allen-Bradley DF1 and MODBUS RTU.